박영기, 하성훈, 성민상, 전준철, 최승복, “시험평가법을 이용한 IRB 면진장치 롤러설계: Part 2: 소재열처리”, 한국소음진동공학회 논문집, 제 23권 4호, 2013.04, pp. 332-337, DOI : http://dx.doi.org/10.5050/KSNVE.2013.23.4.332 Abstract This paper presents a subsequent research work on the roller design of IRB(isolation roller bearing) seismic isolation device presented in Part 1 by focusing on heat treatment. The 더보기…
박영기, 하성훈, 성민상, 전준철, 최승복, “시험평가법을 이용한 IRB 면진장치 롤러설계: Part 1: 기하학적 형상 및 크라우닝”, 한국소음진동공학회 논문집, 제 23권 2호, 2013.02, pp. 184-190, DOI : http://dx.doi.org/10.5050/KSNVE.2013.23.2.185 Abstract This paper presents a new method for roller design of IRB(isolation roller bearing) seismic isolation device using experimental evaluation. Three layered plate is adopted for 더보기…
이종우, 성민상, 우제관, 최승복, “소형 MR 댐퍼의 모델링 및 진동제어”, 한국소음진동공학회 논문집, 제 22권 11호, 2012.11, pp. 1121-1127, DOI : http://dx.doi.org/10.5050/KSNVE.2012.22.11.1121 Abstract This paper presents a new small-sized damper featuring magneto-rheological(MR) fluid which can be applied to vibration control system. The proposed MR damper consists of cylinder, piston, a couple of bearings, oil-seals 더보기…
맹영준, 성민상, 최승복, 권오영, “타이어 압력변화에 따른 1/4 MR 댐퍼 차량의 승차감 고찰”, 한국소음진동공학회 논문집, 제 21권 12호, 2011.11, pp. 1159-1165, DOI : http://dx.doi.org/10.5050/KSNVE.2011.21.12.1159 Abstract This paper presents ride comfort characteristics of a quarter-vehicle magneto-rheological(MR) suspension system with respect to different tire pressure. As a first step, controllable MR damper is designed and 더보기…
김형섭, 성민상, 최승복, 권오영, “타이어 압력변화에 따른 MR 현가장치를 장착한 전체차량의 제어성능평가”, 한국소음진동공학회 논문집, 제 21권 11호, 2011.11, pp. 1067-1073, DOI : http://dx.doi.org/10.5050/KSNVE.2011.21.11.1067 Abstract This paper presents the performance of a full vehicle MR suspension system at different tire pressure. The pressure of tire is related to tire stiffness, which is significantly affects 더보기…
성민상, 최승복, 김철호, 이홍기, 백재호, 한현희, 우제관, “통합제진마운트용 MR 댐퍼의 실험적 성능평가”, 한국소음진동공학회 논문집, 제 20권 12호, 2010.12, pp. 1161-1167, DOI : http://dx.doi.org/10.5050/KSNVE.2010.20.12.1161 Abstract This paper presents experimental performance evaluation of a magnetorheological(MR) damper for integrated isolation mount for ultra-precision manufacturing system. The vibration sources of the ultra-precision manufacturing system can be 더보기…
성민상, 임승구, 최승복, 김철호, 우제관, “통합제진마운트용 MR 댐퍼의 설계 및 성능평가”, 한국소음진동공학회 논문집, 제 20권 11호, 2010.11, pp. 1046-1051, DOI : http://dx.doi.org/10.5050/KSNVE.2010.20.11.1046 Abstract This paper presents design and performance evaluation of magnetorheological(MR) damper for integrated isolation mount. The MR damper needs two functions for the integrated isolation mount. The one is vibration 더보기…
하성훈, 성민상, 구오흥, 최승복, “MR 댐퍼의 최적설계 : 이론적 방법 및 유한요소 방법”, 한국소음진동공학회 논문집, 제 19권 11호, 2009.11, pp.987-995, DOI : http://dx.doi.org/10.5050/KSNVN.2009.19.11.1110 Abstract This paper presents an optimal design of magnetorheological(MR) damper based on analytical methodology and finite element analysis. The proposed MR damper consists of MR valve and gas chamber. The 더보기…
성민상, 하성훈, 구오흥, 최승복, “유체의 압축성을 고려한 ER 댐퍼의 동적 모델링”, 한국소음진동공학회 논문집, 제 19권 7호, 2009.07, pp. 659-666, DOI : http://dx.doi.org/10.5050/KSNVN.2009.19.7.659 Abstract This paper proposes a new method for dynamic modeling of electrorheological(ER) damper considering fluid compressibility. After describing configuration and operating principle of the ER damper, a quasi-static modeling of 더보기…
성민상, 성금길, 한영민, 최승복, 이호근, “댐핑력 히스테리시스를 고려한 MR 서스펜션의 진동제어”, 한국소음진동공학회 논문집, 제 18권 3호, 2008.03, pp. 315-322, DOI : http://dx.doi.org/10.5050/KSNVN.2008.18.3.315 Abstract This paper presents vibration control performances of a commercial magnetorheological(MR) suspension via new control strategy considering hysteresis of the field-dependent damping force of MR damper. A commercial MR damper 더보기…